Flat Seat

Description
Our flat seat flexible connector is spanner tightened and carries our special fibre flat seat seal. This is a high integrity fitting.

Application
Suitable for all general hot and cold water applications particularly where the fitting is exposed to high flow rates and prolonged exposure.

Availability
Available in diameters ranging from 8mm to 50mm and in standard lengths ranging from 225mm to 2000mm. This flexible connector is also available in customised lengths.

Female Hex Rubber Cone

Description
Our hex rubber cone flexible connector is spanner tightened and carries our distinctive blue rubber cone seal.

Application
Suitable for all general hot and cold water applications.

Availability
Available in 8mm and 10mm hose diameters and standard lengths range from 225mm to 1500mm. This flexible connector is also available in customised lengths.

Hand Tightened

Description
Our hand tightened flexible connector carries our distinctive blue rubber cone seal. Being hand tightened, no tools are required for installation.

Application
Suitable for all general hot and cold water applications, particularly those in confined spaces where the use of tools to tighten the hose fitting is difficult.

Availability
Available in 8mm and 10mm hose diameters and standard lengths range from 150mm to 1500mm. This flexible connector is also available in customised lengths.

Olive Compression

Description
The type of flexible connectors carrying these fittings are designed for direct connection to copper tube. The connection is secured by spanner tightening of the compression nut.

Application
Suitable for hot and cold water applications where direct connection to copper tube is required.

Availability
Available in 8mm and 10mm diameter and ranging in standard lengths from 225mm to 1500mm. This flexible connector is also available in customised lengths.

Push On

Description
The push on range of flexible connectors are exclusive to Aquaknect and are designed for direct connection to copper tube. No tools are required as the name implies, just push on and the connection is made. Use only for non coated copper tube. Do not use for any gas applications.

Application
Suitable for all hot and cold water applications. No tools are required to install the push on connector. The installed hose present pleasing aesthetic results together with considerable savings in fitting compared to normal installations.

Availability
Available in 8mm and 10mm diameter accepting 1/2” diameter copper tube. Standard lengths range from 225mm to 1500mm. This flexible connector is also available in customised lengths.

Female Brass Cone

Description
Our brass cone flexible connector is spanner tightened. The male component for this fitting requires a machined chamfer set to accommodate the brass cone. The resulting connection is of high integrity.

Application
Suitable for hot and cold water applications. Particularly hot water where the fitment is exposed to high flow rates and prolonged exposure to hot water.

Availability
Available in diameters ranging from 8mm to 26mm and in standard lengths ranging from 225mm to 3000mm. This flexible connector is also available in customised lengths.

Mixer Tap Connectors

Description
This type of flexible connector is designed to convey hot and cold water to lever mixer taps. The male thread end of the flexible connector is fitted with an O-ring and connects to the lever mixer tap body.

Application
Our mixer flexible connector is designed for connection with lever mixer taps.

Availability
Available in 8mm diameter hose. Standard length is 310mm long. This flexible connector is also available in customised lengths.

Male BSP Fitting

Description
Our male BSP range of flexible connectors are tapered threads designed for thread sealing after spanner tightening. The use of thread sealant is recommended.

Application
Suitable for general hot and cold water applications

Availability
Available in diameters ranging from 8mm to 50mm. Also available in standard and customised lengths.

Elbow Female Hex Rubber Cone

Description
Our elbow flexible connectors are spanner tightened and are very useful in confined spaces or where a neat and aesthetic installation is required.

Application
Suitable for general hot and cold water applications and particularly useful in confined spaces.

Availability
Available in two different models. The first is available in 8mm & 10mm diameter comes with 1/2” BSP nut and features the Aquaknect blue rubber cone. The second is available in 10mm diameter only and comes with BSP nut and flat washer. Also available in standard and customised lengths.